ZyXEL LTE7485-S905 User Guide - Page 108
Start, End Port, Translation Start Port, Start Port, LABEL, DESCRIPTION
View all ZyXEL LTE7485-S905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Chapter 9 Network Address Translation (NAT) Figure 82 Port Forwarding: Add/Edit Note: To configure port forwarding, you need to have the same configurations in the Start Port, End Port, Translation Start Port, and Translation End Port fields. To configure port translation, you need to have different configurations in the Start Port, End Port, Translation Start Port, and Translation End Port fields. Here is an example to configure port translation. Configure Start Port to 100, End Port to 120, Translation Start Port to 200, and Translation End Port to 220. Note: TCP port 7547 is reserved for system use. The following table describes the labels in this screen. Table 34 Port Forwarding: Add/Edit LABEL DESCRIPTION Active Select or clear this field to turn the port forwarding rule on or off. Service Name Select a service to forward or select User Defined and enter a name in the field to the right. WAN Interface Select the WAN interface for which to configure NAT port forwarding rules. LTE Series User's Guide 108