ZyXEL LTE7485-S905 User Guide - Page 44
Con DHCP
View all ZyXEL LTE7485-S905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter 4 Tutorials 3 The Zyxel Device will restart automatically after the configuration file is successfully uploaded. Wait for one minute before logging into the Zyxel Device again. 4.9 Configure DHCP You can enable the DHCP (Dynamic Host Configuration Protocol) in your Zyxel Device to assign IP addresses and DNS servers to systems that support DHCP client capability. DHCP allows clients to obtain TCP/IP configuration at start-up from a server. The following figure shows how Client A uses DHCP to join the Zyxel Device's network. First Client A searches for an available DHCP, and sends a DHCP Discover broadcast message asking for an IP address to connect to. Then the DHCP selects an IP address from its pool of IP addresses for Client A. The DHCP sends a DHCP Offer including the IP address selected and a lease time, which is the period of time Client A will be able to use this IP address, After Client A has received DHCP offers for an IP address, it chooses one and sends out a DHCP Request including the IP address it chose. Finally the DHCP confirms LTE Series User's Guide 44