ZyXEL LTE7485-S905 User Guide - Page 64
What You Need to Know, 6.1.3 Before You Begin, 6.2 Broadband
View all ZyXEL LTE7485-S905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 6 Broadband • Use the Cellular Lock screen to configure the base station you choose to connect to (Section 6.9 on page 73). Table 12 WAN Setup Overview LAYER-2 INTERFACE INTERNET CONNECTION CONNECTION DSL LINK TYPE Ethernet N/A MODE Routing ENCAPSULATION IPoE CONNECTION SETTINGS WAN IPv4/IPv6 IP address, NAT, DNS server and routing feature. 6.1.2 What You Need to Know The following terms and concepts may help as you read this chapter. WAN IP Address The WAN IP address is an IP address for the Zyxel Device, which makes it accessible from an outside network. It is used by the Zyxel Device to communicate with other devices in other networks. The ISP dynamically assigns it each time the Zyxel Device tries to access the Internet. APN Access Point Name (APN) is a unique string which indicates an LTE network. An APN is required for LTE stations to enter the LTE network and then the Internet. 6.1.3 Before You Begin You may need to know your Internet access settings such as LTE APN, WAN IP address and SIM card's PIN code if the INTERNET light on your Zyxel Device is off. Get this information from your service provider. 6.2 Broadband Use this screen to change your Zyxel Device's Internet access settings. The summary table shows you the configured WAN services (connections) on the Zyxel Device. Use information provided by your ISP to configure WAN settings. Click Network Setting > Broadband to access this screen. LTE Series User's Guide 64