ZyXEL LTE7485-S905 User Guide - Page 17
LEDs (Lights), 1.5.2 Panel Ports & Buttons, COLOR, STATUS, DESCRIPTION, LABELS
View all ZyXEL LTE7485-S905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 1 Introduction 1.5.1 LEDs (Lights) None of the LEDs are on if the Zyxel Device is not receiving power. Table 2 LTE7461-M602 / LTE7480-S905 / LTE7485-S905 LED Descriptions COLOR STATUS DESCRIPTION Red Blinking The Zyxel Device is booting or self-testing. On The Zyxel Device encountered an error. Green Blinking The Zyxel Device is trying to connect to the Internet. On The Zyxel Device is connected to the Internet. Amber Blinking The Zyxel Device WiFi is on. Table 3 LTE5388-S905 LED Descriptions LED COLOR STATUS Power Green On Blinking Off Internet Green On Off LTE Signal Strength Green On Orange On Red On Blinking WiFi/WPS Green On Blinking Off LAN Green On DESCRIPTION The Zyxel Device is receiving power and ready for use. The Zyxel Device is booting. The Zyxel Device is not receiving power. There is an Internet connection. There is no Internet connection. The signal strength is excellent. The signal strength is fair. The signal strength is poor. A valid SIM card is inserted, but no signal is detected. The wireless network is activated. The WPS process is in progress. The WiFi/WPS is not activated. The Zyxel Device recognizes an Ethernet cable through the LAN port. 1.5.2 Panel Ports & Buttons The following table describes the items on the bottom panel. Table 4 Panel Ports and Buttons LABELS DESCRIPTION LAN For LTE5388-S905, connect an RJ45 cable to a computer to connect to the internal network In using a LAN port. WiFi Press the WLAN (WiFi) button for more than five seconds to enable the wireless function. To set up a WiFi connection between the Zyxel Device and a wireless client, press the WPS button for longer than five seconds for LTE5388-S905. WPS After the wireless function is enabled, press the WLAN button for more than one second but less than five seconds to quickly set up a secure wireless connection between the Zyxel Device and a WPS-compatible client. To enable WPS, press the WPS button for less than five seconds for LTE5388-S905. RESET Press the button for more than five seconds to return the Zyxel Device to the factory defaults. LTE Series User's Guide 17