ZyXEL NBG-460N User Guide - Page 101
WPA/WPA2
View all ZyXEL NBG-460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Chapter 7 Wireless LAN Table 32 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK LABEL DESCRIPTION Idle Timeout The NBG-460N automatically disconnects a wireless station from the wired network after a period of inactivity. The wireless station needs to enter the username and password again before access to the wired network is allowed. The default time interval is 3600 seconds (or 1 hour). Group Key Update Timer The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/WPA2-PSK key management) or RADIUS server (if using WPA/WPA2 key management) sends a new group key out to all clients. The re-keying process is the WPA/WPA2 equivalent of automatically changing the WEP key for an AP and all stations in a WLAN on a periodic basis. Setting of the Group Key Update Timer is also supported in WPA-PSK/WPA2-PSK mode. The default is 1800 seconds (30 minutes). Apply Click Apply to save your changes back to the NBG-460N. Reset Click Reset to reload the previous configuration for this screen. 7.4.4 WPA/WPA2 Click Network > Wireless LAN to display the General screen. Select WPA or WPA2 from the Security Mode list. Figure 69 Network > Wireless LAN > General: WPA/WPA2 NBG-460N User's Guide 101