ZyXEL NBG-460N User Guide - Page 71
Configuring Bob's NBG-460N VPN Settings
View all ZyXEL NBG-460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 5 Tutorials Table 23 Site-To-Site VPN Tunnel Settings (continued) SETTING BOB'S NBG-460N JACK'S NBG-460N Local Address 192.168.1.35 10.0.0.7 Local Address End /Mask 192.168.1.35 10.0.0.7 Remote Address 10.0.0.7 192.168.1.35 Remote Address 10.0.0.7 End /Mask 192.168.1.35 My IP Address 1.1.1.1 2.2.2.2 Local ID Type IP IP Local Content 1.1.1.1 2.2.2.2 Secure Gateway 2.2.2.2 Address 1.1.1.1 Peer ID Type IP IP Peer Content 2.2.2.2 1.1.1.1 Encapsulation Mode Tunnel Tunnel IPSec Protocol ESP ESP Pre-Shared Key ThisIsMySecretKey ThisIsMySecretKey Encryption Algorithm 3DES 3DES Authentication Algorithm SHA1 SHA1 5.3.1 Configuring Bob's NBG-460N VPN Settings To configure these settings Bob uses the NBG-460N Web Configurator. 1 Log into the NBG-460N Web Configurator and click VPN > Modify icon. This displays the VPN Rule Setup (basic) screen. 2 Select the Active checkbox to enable the VPN rule after it has been created. Make sure IKE is selected as the IPSec Keying Mode. Figure 41 Tutorial: Property NBG-460N User's Guide 71