ZyXEL NBG-460N User Guide - Page 142
Advanced LAN Screen
View all ZyXEL NBG-460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Chapter 9 LAN The following table describes the labels in this screen. Table 50 Network > LAN > IP Alias LABEL DESCRIPTION IP Alias 1,2 Select the check box to configure another LAN network for the NBG460N. IP Address Enter the IP address of your NBG-460N in dotted decimal notation. IP Subnet Mask Your NBG-460N will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the NBG-460N. Apply Click Apply to save your changes back to the NBG-460N. Reset Click Reset to begin configuring this screen afresh. 9.6 Advanced LAN Screen To change your NBG-460N's advanced IP settings, click Network > LAN > Advanced. The screen appears as shown. Figure 96 Network > LAN > Advanced The following table describes the labels in this screen. Table 51 Network > LAN > Advanced LABEL DESCRIPTION Multicast Setup Multicast Select IGMP V-1 or IGMP V-2 or None. IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish membership in a Multicast group - it is not used to carry user data. IGMP version 2 (RFC 2236) is an improvement over version 1 (RFC 1112) but IGMP version 1 is still in wide use. If you would like to read more detailed information about interoperability between IGMP version 2 and version 1, please see sections 4 and 5 of RFC 2236. Any IP Setup 142 NBG-460N User's Guide