ZyXEL NBG-460N User Guide - Page 140
What You Need To Know, LAN IP Screen
View all ZyXEL NBG-460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Chapter 9 LAN 9.3 What You Need To Know The LAN parameters of the NBG-460N are preset in the factory with the following values: • IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits) • DHCP server enabled with 32 client IP addresses starting from 192.168.1.33. These parameters should work for the majority of installations. If your ISP gives you explicit DNS server address(es), read the embedded Web Configurator help regarding what fields need to be configured. 9.3.1 IP Pool Setup The NBG-460N is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to 192.168.1.64. This configuration leaves 31 IP addresses (excluding the NBG-460N itself) in the lower range (192.168.1.2 to 192.168.1.32) for other server computers, for instance, servers for mail, FTP, TFTP, web, etc., that you may have. Refer to Section 4.4.6 on page 56 for information on IP Address and Subnet Mask. 9.3.2 LAN TCP/IP The NBG-460N has built-in DHCP server capability that assigns IP addresses and DNS servers to systems that support DHCP client capability. Refer to the Section 4.4.7 on page 57 section for information on System DNS Servers. 9.4 LAN IP Screen Use this screen to change your basic LAN settings. Click Network > LAN. Figure 94 Network > LAN > IP 140 NBG-460N User's Guide