ZyXEL NBG-460N User Guide - Page 303
Wall-mounting Instructions
View all ZyXEL NBG-460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
Chapter 27 Product Specifications and Wall-Mounting Instructions Table 118 Standards Supported (continued) STANDARD DESCRIPTION IEEE 802.11x Port Based Network Access Control. IEEE 802.11e QoS IEEE 802.11 e Wireless LAN for Quality of Service Microsoft PPTP MS PPTP (Microsoft's implementation of Point to Point Tunneling Protocol) MBM v2 Media Bandwidth Management v2 Wall-mounting Instructions Do the following to hang your NBG-460N on a wall. Note: See the Figure 179 on page 304 for the size of screws to use and how far apart to place them. 1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall. 2 Drill two holes for the screws. Make sure the distance between the centers of the holes matches what is listed in the product specifications appendix. Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws. 3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall. 4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of the NBG-460N with the connection cables. 5 Align the holes on the back of the NBG-460N with the screws on the wall. Hang the NBG-460N on the screws. Figure 178 Wall-mounting Example NBG-460N User's Guide 303