ZyXEL NBG-460N User Guide - Page 218
IP Static Route Screen
View all ZyXEL NBG-460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Chapter 16 Static Route • Use the Static Route Setup screen (Section 16.3.1 on page 219) to add or edit a static route rule. 16.3 IP Static Route Screen Use this screen to view existing static route rules. Click Management > Static Route to open the IP Static Route screen. The following screen displays. Figure 133 Management > Static Route > IP Static Route The following table describes the labels in this screen. Table 71 Management > Static Route > IP Static Route LABEL DESCRIPTION # This is the index number of an individual static route. The first entry is for the default route and not editable. Name This is the name that describes or identifies this route. Active This icon is turned on when this static route is active. Destination Gateway Modify Click the Edit icon under Modify and select the Active checkbox in the Static Route Setup screen to enable the static route. Clear the checkbox to disable this static route without having to delete the entry. This parameter specifies the IP network address of the final destination. Routing is always based on network number. This is the IP address of the gateway. The gateway is an immediate neighbor of your NBG-460N that will forward the packet to the destination. On the LAN, the gateway must be a router on the same segment as your NBG-460N; over the WAN, the gateway must be the IP address of one of the remote nodes. Click the Edit icon to open the static route setup screen. Modify a static route or create a new static route in the Static Route Setup screen. Click the Remove icon to delete a static route. 218 NBG-460N User's Guide