ZyXEL NBG-460N User Guide - Page 109
WPS Screen
View all ZyXEL NBG-460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Chapter 7 Wireless LAN 7.8 WPS Screen Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS status. To open this screen, click Network > Wireless LAN > WPS tab. Figure 74 Network > Wireless LAN > WPS The following table describes the labels in this screen. Table 38 Network > Wireless LAN > WPS LABEL DESCRIPTION WPS Setup Enable WPS Select this to enable the WPS feature. PIN Number This displays a PIN number last time system generated. Click Generate to generate a new PIN number. WPS Status Status This displays Configured when the NBG-460N has connected to a wireless network using WPS or when Enable WPS is selected and wireless or wireless security settings have been changed. The current wireless and wireless security settings also appear in the screen. Release Configuration Apply Refresh This displays Unconfigured if WPS is disabled and there are no wireless or wireless security changes on the NBG-460N or you click Release_Configuration to remove the configured wireless and wireless security settings. This button is only available when the WPS status displays Configured. Click this button to remove all configured wireless and wireless security settings for WPS connections on the NBG-460N. Click Apply to save your changes back to the NBG-460N. Click Refresh to get this screen information afresh. NBG-460N User's Guide 109