ZyXEL NBG-460N User Guide - Page 141
LAN IP Alias
View all ZyXEL NBG-460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Chapter 9 LAN The following table describes the labels in this screen. Table 49 Network > LAN > IP LABEL DESCRIPTION LAN TCP/IP IP Address Type the IP address of your NBG-460N in dotted decimal notation 192.168.1.1 (factory default). IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your NBG-460N will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the NBG-460N. Apply Click Apply to save your changes back to the NBG-460N. Reset Click Reset to begin configuring this screen afresh. 9.5 LAN IP Alias IP alias allows you to partition a physical network into different logical networks over the same Ethernet interface. The NBG-460N supports three logical LAN interfaces via its single physical Ethernet interface with the NBG-460N itself as the gateway for each LAN network. To change your NBG-460N's IP alias settings, click Network > LAN > IP Alias. The screen appears as shown. Figure 95 Network > LAN > IP Alias NBG-460N User's Guide 141