ZyXEL NBG-460N User Guide - Page 137
Table 48
View all ZyXEL NBG-460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Chapter 8 WAN To change your NBG-460N's advanced WAN settings, click Network > WAN > Advanced. The screen appears as shown. Figure 92 Network > WAN > Advanced The following table describes the labels in this screen. Table 48 Network > WAN > Advanced LABEL DESCRIPTION Multicast Setup Multicast This applies to traffic routed from the WAN to the LAN. Select IGMP V-1, IGMP V-2 or None. For Internet Protocol Television (IPTV), select IGMP V-2. This is the protocol used for playing Live TV, which is an IPTV format. Another format, Video On Demand (VOD), does not use multicasting. Selecting None may cause incoming traffic to be dropped or sent to all connected network devices. IPTV Port Setup Choose IPTV STB Port Select the port where you want to connect your STB. Windows Networking (NetBIOS over TCP/IP) Allow between LAN and WAN Select this check box to forward NetBIOS packets from the LAN to the WAN and from the WAN to the LAN. If your firewall is enabled with the default policy set to block WAN to LAN traffic, you also need to enable the default WAN to LAN firewall rule that forwards NetBIOS traffic. Allow Trigger Dial Auto-bridge Clear this check box to block all NetBIOS packets going from the LAN to the WAN and from the WAN to the LAN. Select this option to allow NetBIOS packets to initiate calls. NBG-460N User's Guide 137