2011 Chevrolet Volt Owner's Manual - Page 402

10-36 Vehicle Care 3. Turn the bulb socket counterclockwise to remove it from the bulb assembly. 4. Pull the bulb from the bulb socket. 5. Push a new bulb straight into the bulb socket. 6. Reinstall the bulb socket by lining up the tabs in the lamp assembly and turn it clockwise to lock it into place. 7. Replace the two inboard screws from the aero panel. License Plate Lamp To replace one of these bulbs: A. Bulb Socket B. Bulb C. Lamp Assembly 3. Turn the bulb socket (A) counterclockwise to remove it from the lamp assembly (C). 4. Pull the bulb (B) straight out of the bulb socket (A). 5. Push the replacement bulb straight into the bulb socket (A) and turn the bulb socket (A) clockwise to install into the lamp assembly (C). Passenger Side Shown, Driver Side Similar 1. Press the spring clip on the right end of the lamp assembly to the left to unlock the lamp assembly. 2. Pull down on the lamp assembly to remove it from the fascia.