2011 Chevrolet Volt Owner's Manual - Page 43

Keys, Doors and Windows Starting the Vehicle with a Low Transmitter Battery If the transmitter battery is weak, the DIC may display NO REMOTE DETECTED when you try to start the vehicle. The REPLACE BATTERY IN REMOTE KEY message may also be displayed at this time. To start the vehicle: 1. Open the instrument panel storage and remove the rubber mat. 2. Extend the key blade and place the blade into the slot. 3. With the vehicle in P (Park) or N (Neutral), press the brake pedal and the POWER O button on the center stack. See Power Button on page 9‑18 for additional information. Replace the transmitter battery as soon as possible. 2-7 Battery Replacement Notice: When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter. To replace the battery: 1. Extend the key blade and open the battery cover on the back of the unit. 2. Remove the used battery. Avoid touching the circuit board to other components. 3. Insert the new battery, positive side facing down toward the base. 4. Reassemble the battery cover. 5. Check the operation of the transmitter with the vehicle.