2010 Chrysler PT Cruiser Owner Manual - Page 167

166 UNDERSTANDING YOUR INSTRUMENT PANEL OFF. Opening a vehicle door will cancel this feature. Press and hold the EVIC button when in this display until Press and hold the EVIC button when in this display until US or METRIC appears, to make your selection. OFF, 45 sec, 5 min, or 10 min appears, to make your Automatic Compass Calibration selection. The compass on your vehicle is self-calibrating, eliminatTurn Headlights on with Remote Key Unlock ing the need to manually calibrate the compass. When When this feature is selected, the headlights will activate the vehicle is new, the compass may appear erratic and and remain on for up to 90 seconds when the doors are the CAL indicator message will flash in the EVIC until unlocked using the RKE transmitter. Press and hold the the calibration is complete. EVIC button when in this display until OFF, 30 sec, A good calibration requires a level surface and an envi60 sec, or 90 sec appears, to make your selection. ronment free from large metallic objects such as buildConfirmation of Voice Commands - If Equipped ings, bridges, underground cables, railroad tracks, etc. When ON is selected, all voice commands from the Calibrate the compass by driving slowly, under 5 mph U-Connect௡ system are confirmed. Press and hold the (8 km/h) in one or more complete circles in an area free EVIC button when in this display until ON or OFF from large metallic objects, until the CAL indicator in the appears, to make your selection. EVIC turns off. The compass will now function normally. Display English or Metric The EVIC, odometer, and navigation system units can be changed between English and METRIC.