2010 Chrysler PT Cruiser Owner Manual - Page 267

266 WHAT TO DO IN EMERGENCIES 1. Remove the scissors jack and lug wrench from the 2. There are two jacking locations on each side of the body, one at the front of the vehicle and one in the rear on stowage bag. the trailing arm bracket under the triangular cut out NOTE: If equipped with a center cap that covers the symbol. Turn the jack screw to the right until the jack wheel nuts, pry off the cap using the small end of the lug head is properly engaged with the lift area closest to the wrench. To reinstall the cap, make sure it is properly wheel to be changed. lined up before pushing it onto the wheel. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground. CAUTION! Do not attempt to raise the vehicle by jacking on the cross-member below the radiator, on the front suspension cross-member, or on the rear axle assembly. Front Jacking Location