2010 Chrysler PT Cruiser Owner Manual - Page 24

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Using The Panic Alarm To turn the Panic Alarm feature ON or OFF, press and hold the PANIC button on the RKE transmitter for at least one second and release. When the Panic Alarm is on, the headlights and park lights will flash, the horn will pulse on and off, and the interior lights will turn on. total of eight RKE transmitters can be programmed to your vehicle through the use of a currently-programmed RKE transmitter. NOTE: If vehicle is equipped with the optional EVIC in the instrument cluster, the RKE transmitters may also be programmed through the EVIC display. 2 The Panic Alarm will stay on for three minutes unless Use the following procedure to program additional RKE you turn it off by pressing the PANIC button a second transmitters if the vehicle is not equipped with Sentry time or if the vehicle speed is 5 mph (8 km/h) or greater. Key௡: NOTE: When you turn off the Panic Alarm by pressing NOTE: When entering program mode using currentlythe PANIC button a second time, you may have to be programmed RKE transmitter, all other programmed closer to the vehicle due to the Radio Frequency (RF) transmitters will be erased and you will have to repronoises of the system. gram them for your vehicle. To Program Additional Transmitters 1. Gather every transmitter that is to be used with the Each vehicle is shipped from the assembly plant with two vehicle, including any transmitters that are currently RKE transmitters programmed only for that vehicle. A programmed.