2010 Chrysler PT Cruiser Owner Manual - Page 23

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. While the LOCK button is pressed (after four seconds), 3. Test the "Flash Lights with Lock" feature while outside of the vehicle by pressing the LOCK button on the press the PANIC button. Release both buttons. RKE transmitter with the ignition in the LOCK position, The "Sound Horn on Lock" feature can be reactivated by and the key removed. repeating this procedure. NOTE: Pressing the LOCK button on the RKE transmitTo Turn Off "Flash Lights with Lock" ter while you are in the vehicle will activate the Security NOTE: The "Flash Lights with Lock" feature can be Alarm. Opening a door with the Security Alarm activated turned on or off. For EVIC-equipped vehicles refer to will cause the alarm to sound. Press the UNLOCK button "Electronic Vehicle Information Center (EVIC) - If to deactivate the Security Alarm. Equipped/Personal Settings (Customer-Programmable The "Flash Lights on Lock" features can be reactivated by Features)" in "Understanding Your Instrument Panel" for repeating this procedure. further information. For non-EVIC-equipped vehicles, Panic Alarm perform the following steps: The Panic Alarm mode flashes the park lights, and 1. Press the UNLOCK button for 4 to 10 seconds. sounds the horn for about three minutes or until the 2. While the UNLOCK button is pressed, (after four alarm is turned off. seconds) press the LOCK button. Release both buttons.