2010 Chrysler PT Cruiser Owner Manual - Page 185

184 UNDERSTANDING YOUR INSTRUMENT PANEL MAX A/C To quickly cool the vehicle interior follow the steps listed below: 1. Set the Temperature Control to Max Cool. 2. Set the Mode Control to Panel or Bi-Level. 3. Press the Recirculation button and the A/C button. 4. Adjust the Fan Control to desired airflow setting. Circulation Control Rotate this control to choose between outside air intake or recirculation of the air inside the vehicle. A lamp will illuminate when you are in Recirculation mode. Only use the Recirculation mode to temporarily block out any outside odors, smoke, or dust and to cool the interior rapidly upon initial startup in very hot or humid weather. NOTE: Continuous use of the Recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode is not recommended. In cold or damp weather, the use of the Recirculation NOTE: mode will cause windows to fog on the inside because of • Recirculation Mode will not operate in Floor, Mix or moisture buildup inside the vehicle. For defogging, select Defrost modes. the Outside Air position. • See "Circulation Control" in this section, for proper or NOTE: Recirculation mode will not operate in Floor, extended use of this position. Mix or Defrost modes.