2010 Chrysler PT Cruiser Owner Manual - Page 198
2010 Chrysler PT Cruiser Manual
Page 198 highlights
STARTING AND OPERATING 197 RESET Mode The transmission is monitored electronically for abnormal conditions. If a condition is detected that could cause damage, the transmission shifts automatically into second gear. The transmission remains in second gear despite the forward gear selected. PARK, REVERSE, and NEUTRAL will continue to operate. This second gear limp-in feature allows the vehicle to be driven to an authorized dealer for service without damaging the transmission. NOTE: Even if the transmission can be reset, it is recommended that you visit an authorized dealer at your earliest possible convenience. Your authorized dealer has diagnostic equipment to determine if the problem could recur. Gear Ranges DO NOT race the engine when shifting from PARK or NEUTRAL positions into another gear range. PARK This range supplements the parking brake by locking the In the event that the problem has been momentary, the transmission. The engine can be started in this range. transmission can be reset to regain all forward gears: Never use PARK while the vehicle is in motion. Apply 1. Stop the vehicle and move the shift lever into PARK. the parking brake when leaving the vehicle in this range. Always apply the parking brake first, and then move the 2. Turn the ignition to OFF then restart the engine. shift lever into the PARK position. 3. Move the shift lever into DRIVE and resume driving. 4. If the transmission cannot be reset, authorized dealer service is required. 5