2010 Chrysler PT Cruiser Owner Manual - Page 19

18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE your vehicle. The remaining keys must then be repro- If something triggers the Vehicle Security Alarm, it signal grammed. All vehicle keys must be taken to the autho- for about 18 minutes. For the first three minutes the horn rized dealer at the time of service to be reprogrammed. will sound and the headlights, park lights, tail lights and the Vehicle Security Light in the cluster will flash. Then General Information the exterior lights will flash for another 15 minutes. The Sentry Key௡ system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is If the disturbance that triggered the alarm is no longer present (doors, liftgate, ignition switch), the alarm will subject to the following conditions: continue to sound until three minutes of alarm time is • This device may not cause harmful interference. reached. • This device must accept any interference that may be To Set the Alarm received, including interference that may cause undes1. Remove the key from the ignition switch and get out ired operation. of the vehicle. VEHICLE SECURITY ALARM - IF EQUIPPED The Vehicle Security Alarm monitors the doors, liftgate, 2. Lock the door using either the power door lock switch, and ignition switch for unauthorized operation. The or the Remote Keyless Entry (RKE) transmitter, and close Vehicle Security Alarm provides both audible and visible all doors. signals when activated. 3. The Vehicle Security Light in the instrument cluster will flash rapidly for 16 seconds. This shows that the