2013 Chrysler 300 Owner Manual - Page 194

192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Adjust all memory profile settings to desired prefer- • The Recall Memory with Remote Key Unlock feature ences (i.e., seat, side mirror, adjustable pedals [if can be enabled through the Uconnect® System, refer to equipped], power tilt and telescopic steering column "Uconnect® Settings" in "Understanding Your Instru[if equipped], and radio station presets). ment Panel" for further information. 3. Press and release the S (Set) button on the memory Linking And Unlinking The Remote Keyless Entry Transmitter To Memory switch. 4. Within five seconds, memory buttons (1) Information Center memory position has NOTE: press and release either of the or (2). The Electronic Vehicle (EVIC) will display which been set. Your RKE transmitters can be programmed to recall one of two pre-programmed memory profiles by pressing the UNLOCK button on the RKE transmitter. To program your RKE transmitters, perform the following: • Memory profiles can be set without the vehicle in 1. Remove the Key Fob from the ignition (or change the ignition to OFF, for vehicles equipped with Keyless PARK, but the vehicle must be in PARK to recall a Enter-N-Go). memory profile.