2013 Chrysler 300 Owner Manual - Page 195

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 2. Select desired memory profile (1) or (2). The system Memory Position Recall will recall any stored settings for this profile. Wait for NOTE: The vehicle must be in PARK to recall memory the system to complete the memory recall before positions. If a recall is attempted when the vehicle is not continuing to Step 3. in PARK, a message will display in the EVIC (if 3. Once the profile has been recalled, press and release equipped). the SET (S) button on the memory switch, then press To recall the memory settings for driver one, press and release button (1) or (2) accordingly. "Memory MEMORY button number (1) on the driver's door or the Profile Set" (1 or 2) will display in the instrument UNLOCK button on the RKE transmitter linked to cluster on vehicles equipped with the EVIC. memory position 1. 4. Press and release the LOCK button on the RKE To recall the memory setting for driver two, press transmitter within 10 seconds. MEMORY button number (2) on the driver's door or the NOTE: Your RKE transmitters can be unlinked to your UNLOCK button on the RKE transmitter linked to memory settings by following steps 1-4 above and press- memory position 2. ing the UNLOCK button (instead of LOCK) on the RKE A recall can be cancelled by pressing any of the transmitter in Step 4. MEMORY buttons (S, 1, or 2) on the driver's door during a recall. When a recall is cancelled, the driver seat, side mirror, adjustable pedals (if equipped), and power tilt 3