2013 Chrysler 300 Owner Manual - Page 356

354 UNDERSTANDING YOUR INSTRUMENT PANEL In MAX A/C, the blower level and mode position can be adjusted to desired user settings. Pressing other settings will cause the MAX A/C operation to switch to the prior settings and the MAX A/C indicator will turn off. Recirculation When outside air contains smoke, odors, or high humidity, or if rapid cooling is desired, you may wish to recirculate interior air by pressing the Recirculation control button. The recirculation indicator will illuminate when this button is selected. Push the button a second time to turn off the Recirculation mode and allow outside air into the vehicle. mode to improve window clearing operation. Recirculation will be disabled automatically if this mode is selected. Attempting to use Recirculation while in this mode will cause the LED in the control button to blink and then turn off. Automatic Temperature Control (ATC) ATC Hard-keys are located in the center of the instrument panel. Soft-keys are accessible on the Uconnect® Touch-screen. Automatic Operation 1. Press the AUTO hard-key or soft-key button (4) on the Automatic Temperature Control (ATC) Panel. NOTE: In cold weather, use of Recirculation mode may lead to excessive window fogging. The recirculation 2. Next, adjust the temperature you would like the feature may be unavailable (soft button greyed out) if system to maintain by adjusting the driver and pasconditions exist that could create fogging on the inside of senger temperature hard or soft control buttons (8, 9, the windshield. On systems with Manual Climate Controls, the Recirculation mode is not allowed in Defrost