2013 Chrysler 300 Owner Manual - Page 42

40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To close the window part way, lift the window switch to Reset Auto-Up the first detent and release it when you want the window Should the Auto Up feature stop working, the window to stop. probably needs to be reset. To reset Auto Up: NOTE: 1. Pull the window switch up to close the window completely and continue to hold the switch up for an • If the window runs into any obstacle during autoadditional two seconds after the window is closed. closure, it will reverse direction and then go back down. Remove the obstacle and use the window 2. Push the window switch down firmly to the second switch again to close the window. detent to open the window completely and continue to hold the switch down for an additional two seconds • Any impact due to rough road conditions may trigger after the window is fully open. the auto-reverse function unexpectedly during autoclosure. If this happens, pull the switch lightly to the Window Lockout Switch first detent and hold to close the window manually. The window lockout switch on the driver's door trim panel allows you to disable the window controls on the WARNING! rear passenger doors and the rear sunscreen (if There is no anti-pinch protection when the window equipped). To disable the window controls and the rear is almost closed. Be sure to clear all objects from the sunscreen, press and release the window lockout button window before closing. (setting it in the DOWN position). To enable the window