2013 Chrysler 300 Owner Manual - Page 55

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 you will prefer a higher position. When you release the Seat Belts In Passenger Seating Positions anchorage try to move it up and down to make sure that The seat belts in the passenger seating positions are it is locked in position. equipped with Automatic Locking Retractors (ALR) which are used to secure a child restraint system. For Lap/Shoulder Belt Untwisting Procedure additional information, refer to "Installing Child ReUse the following procedure to untwist a twisted lap/ straints Using The Vehicle Seat Belt" under the "Child shoulder belt. Restraints" section. The chart below defines the type of 1. Position the latch plate as close as possible to the feature for each seating position. anchor point. Driver Center Passenger 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, First Row N/A N/A ALR grasp and twist the belt webbing 180 degrees to create Second ALR ALR ALR a fold that begins immediately above the latch plate. Row 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of • N/A - Not Applicable the latch plate. • ALR - Automatic Locking Retractor 4. Continue to slide the latch plate up until it clears the folded webbing. 2