2013 Chrysler 300 Owner Manual - Page 196

194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE and telescopic steering column (if equipped) stop moving. A delay of one second will occur before another recall can be selected. Easy Entry/Exit Seat (Available With Memory Seat Only) This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. rear stop. The seat will return to its previously set position when you place the ignition into the ACC or RUN position. • When you remove the Key Fob from the ignition (or change the ignition to OFF, for vehicles equipped with Keyless Enter-N-Go), the driver seat will move to a position 0.3 in (7.7 mm) forward of the rear stop if the driver seat position is between 0.9 in and 2.7 in (22.7 mm and 67.7 mm) forward of the rear stop. The seat will return to its previously set position when you place the ignition to the ACC or RUN position. The distance the driver seat moves depends on where you have the driver seat positioned when you remove the Key Fob from the ignition (or change the ignition to OFF, • The Easy Entry/Easy Exit feature is disabled when the for vehicles equipped with Keyless Enter-N-Go). driver seat position is less than 0.9 in (22.7 mm) • When you remove the Key Fob from the ignition (or forward of the rear stop. At this position, there is no change the ignition to OFF, for vehicles equipped with benefit to the driver by moving the seat for Easy Exit Keyless Enter-N-Go), the driver seat will move about or Easy Entry. 2.4 in (60 mm) rearward if the driver seat position is greater than or equal to 2.7 in (67.7 mm) forward of the Each stored memory setting will have an associated Easy Entry and Easy Exit position.