2006 Ducati Multistrada 620 Owners Manual - Page 137

2) Check that the stop switch (1, fig. 35) is positioned to (RUN), then press the starter button (2). This model features servo-assisted starting. Press and immediately release the start button (2) to use the servo-assisted engine starting function. When you press the button (2) the starter motor operates automatically for a maximum time determined by engine temperature. The system disengages the starter motor as soon as the engine starts. If the engine fails to start, wait at least 2 seconds before pressing the start button (2) again. Allow the engine to start on its own, without turning the throttle twistgrip. Notes If the battery is flat the system automatically disables operation of the starter motor. Important Do not rev up the engine when it is cold. Wait for the engine oil to warm up. This will ensure that all the internal components of the engine are correctly lubricated. 1 E 2 fig. 35 44