2006 Ducati Multistrada 620 Owners Manual - Page 145

E Movable fairing Unscrew the four screws (1) securing the movable fairing to the brackets with the seal (2). Remove the movable fairing complete with the windshield (fig. 40). To replace the windshield, use the special torx wrench to unscrew the screws (3) and nylon washers (4), while holding the rubber coated nuts (5) in position from the inside of the fairing (fig. 40a). When fitting the new windshield, tighten the screws (2) starting with the central screw. Make sure that the seals (2) are correctly fitted to the brackets, then fit the movable fairing and secure it with the screws (1). Tighten the screws (1). 2 1 fig. 40 5 4 3 fig. 40a 52