2011 Jeep Wrangler Owner Manual - Page 186

184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The front panel(s) must be positioned properly 4. Remove the six Torx௡ head screws that secure the hard to ensure sealing. Set the panels on the windshield frame top to the vehicle (along the interior bodyside) using a so that there is no overhang. Also, make sure that the #40 Torx௡ head driver. panels are sitting flush with the body. 5. Open the swing gate all the way to ensure clearance of the rear window glass. Lift the rear window glass. 2. Install the right panel first, then the left panel. 3. Reinstall the panel(s) using the same steps for removal in reverse order. Rear Hard Top Removal 1. Remove both front panels. Refer to "Front Panel(s) Removal" in this section. 2. Open both doors. 3. Remove the two Torx௡ head screws that secure the hard top at the B-pillar (near the top of the door) using a #40 Torx௡ head driver (Four-Door Only).