2011 Jeep Wrangler Owner Manual - Page 385

STARTING AND OPERATING 383 Transmission Limp Home Mode Transmission function is monitored for abnormal conditions. If a condition is detected that could result in transmission damage, the Transmission Limp Home Mode will be engaged. In this mode, the transmission will operate (when in DRIVE) in second gear only. To reset the transmission, use the following procedure: 1. Stop the vehicle. 2. Move the shift lever to the PARK position. 3. Turn OFF the engine and be sure to turn the key fob to the LOCK position. PARK, REVERSE, and NEUTRAL will continue to operate. Only second gear will operate in the DRIVE position. Have the transmission checked at your authorized dealer as soon as possible. Torque Converter Clutch A feature designed to improve fuel economy has been added to the automatic transmission of this vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly different feeling or response during normal operation in high gear. When the vehicle speed drops or during acceleration, the clutch automatically and smoothly disengages. 5 4. Wait approximately 10 seconds, then restart the en- FOUR-WHEEL DRIVE OPERATION (COMMAND-TRAC Iா OR ROCK-TRACா) gine. Operating Instructions/Precautions 5. Move the shift lever to the desired gear range. The transfer case provides four mode positions: If the problem is no longer detected, the transmission will return to normal operation. If the problem persists, • 2H (Two-wheel drive high range)