2011 Jeep Wrangler Owner Manual - Page 548

546 MAINTAINING YOUR VEHICLE Exterior Lights Bulb Type Backup Lamps (2) ...3157 Center High-Mounted Stop Lamp (1) ...L.E.D. Fog Lamps ...PSX24W Front Park/Turn Signal Lamps (2) ...3157 Front Side Marker Lamps (2) ...168 Headlamps (2) ...H13 Rear Stop/Tail/Turn Lamps (2) ...3157 License Lamp ...194 conditions change to allow the condensation to change back into a vapor. Turning the lamps on will usually accelerate the clearing process. Headlamp 1. Open hood and support using prop rod. 2. Remove the front grille. Turn the retainers along the top 1/4 turn counterclockwise and remove. 3. Pull the bottom of the grille away starting at one side NOTE: Numbers refer to commercial bulb types that and working toward the other. can be purchased from your local authorized dealer. 4. Turn both park and turn signal socket assemblies 1/4 If a bulb needs to be replaced, visit your authorized turn counterclockwise and remove. dealer or refer to the applicable Service Manual. 5. Remove the four screws holding the metal retaining BULB REPLACEMENT ring. NOTE: Lens fogging can occur under certain atmo- 6. Remove the lamp from the collar. spheric conditions. This will usually clear as atmospheric 7. Grasp the bulb and turn 1/4 turn counterclockwise.