2011 Jeep Wrangler Owner Manual - Page 287

UNDERSTANDING YOUR INSTRUMENT PANEL 285 button to increase the variance one step. Repeat as necessary until the desired variance is achieved. NOTE: The factory default zone is 8. During programming, the zone value will wrap around from zone 15 to zone 1. Manual Compass Calibration If the compass appears erratic, inaccurate or abnormal, you may wish to calibrate the compass. Prior to calibrating the compass, make sure the proper zone is selected. 1. Start the engine and leave the transmission in the PARK position. 4 Compass Variance Map To Set The Variance 2. Press and hold the RESET button (for approximately Start the engine and leave the transmission gear selector 10 seconds) until the current variance zone number is lever in the PARK position. Press and hold the RESET displayed. button on the steering wheel (for approximately ten seconds) until the current variance zone number is displayed. To change the zone, press and release the STEP