2011 Jeep Wrangler Owner Manual - Page 84

82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE description under "Seat Belts In Passenger Seating Posi- Installing a Child Restraint with an ALR: tions" section. The chart below defines the seating posi1. To install a child restraint with ALR, first, pull enough tions with an Automatic Locking Retractor (ALR) or a of the seat belt webbing from the retractor to route it cinching latch plate. through the belt path of the child restraint. Slide the latch Driver Center Passenger plate into the buckle until you hear a "click." Next, CRS Lock CRS Lock CRS Lock extract all the seat belt webbing out of the retractor and then allow the belt to retract into the retractor. As the belt First Row N/A N/A ALR retracts, you will hear a ratcheting sound. This indicates Second Row ALR ALR ALR the safety belt is now in the Automatic Locking mode. • N/A - Not Applicable 2. Finally, pull on any excess webbing to tighten the lap • ALR - Automatic Locking Retractor portion around the child restraint. Any seat belt system will loosen with time, so check the belt occasionally, and pull it tight if necessary.