2011 Jeep Wrangler Owner Manual - Page 282

280 UNDERSTANDING YOUR INSTRUMENT PANEL position. The light should turn off. If the light remains on 28. Sway Bar Indicator Light - If Equipped This indicator will illuminate when the front with the engine running, your vehicle will usually be drivable; however, see an authorized dealer for service as sway bar is disconnected. soon as possible. If the light continues to flash when the engine is running, 29. Electronic Stability Control (ESC) OFF Indicator immediate service is required and you may experience Light - If Equipped reduced performance, an elevated/rough idle, or engine This light indicates the Electronic Stability Constall and your vehicle may require towing. The light will trol (ESC) is off. come on when the ignition is first turned to ON/RUN and remain on briefly as a bulb check. If the light does not come on during starting, have the system checked by an 30. Electronic Throttle Control (ETC) Light authorized dealer. This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the engine is running, the light will either stay on or flash depending on the nature of the problem. Cycle the ignition key when the vehicle is safely and completely stopped and the shift lever is placed in the PARK