2011 Jeep Wrangler Owner Manual - Page 424
2011 Jeep Wrangler Manual
Page 424 highlights
422 STARTING AND OPERATING The following procedure will disable (or re-enable) ESC 9. Turn the steering wheel back to center. functionality in the vehicle: 10. Press and hold the ESC OFF button for seven seconds. 1. Shift the transfer case into the 4H range position. 2. Turn the steering wheel until it is centered and the 11. Cycle the ignition key to OFF. wheels are pointed straight ahead. After performing the ESC disable procedure correctly, "ESC OFF" will be displayed in the odometer for ap3. Cycle the ignition key OFF to ON. proximately 12 seconds each time the ignition is moved 4. Wait approximately five seconds for the system bulb to ON. Repeating the ESC disable procedure will recheck. enable normal ESC operation. 5. Turn and hold the steering wheel one-half turn to the ESC Activation/Malfunction Indicator Light And right (clockwise). ESC OFF Indicator Light The "ESC Activation/Malfunction Indicator 6. Press and hold the ESC OFF button for seven seconds. Light" in the instrument cluster will come on 7. Turn the steering wheel back to center, and turn and when the ignition switch is turned to the ON hold an additional one-half turn to the left (counterclockposition. It should go out with the engine wise). running. If the "ESC Activation/Malfunction Indicator 8. Press and hold the ESC OFF button for seven seconds. Light" comes on continuously with the engine running, a