2011 Jeep Wrangler Owner Manual - Page 292

290 UNDERSTANDING YOUR INSTRUMENT PANEL indicator system is duty cycle based, which means the Trip Functions engine oil change interval may fluctuate dependent upon Press and release the MENU button until one of the following Trip Functions displays in the EVIC: your personal driving style. Unless reset, this message will continue to display each time you turn the ignition switch to the ON position. To turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance), perform the following procedure: • Average Fuel Economy • Distance To Empty • Elapsed Time • Display Units of Measure in Press the SCROLL button to cycle through all the Trip 1. Turn the ignition switch to the ON position. Do not Computer functions. start the engine. The Trip Functions mode displays the following informa2. Fully depress the accelerator pedal slowly three times tion: within 10 seconds. • Average Fuel Economy 3. Turn the ignition switch to the LOCK position. Shows the average fuel economy since the last reset. NOTE: If the indicator message illuminates when you When the fuel economy is reset, the display will read start the vehicle, the oil change indicator system did not "RESET" or show dashes for two seconds. Then, the reset. If necessary, repeat this procedure.