2011 Jeep Wrangler Owner Manual - Page 356

354 UNDERSTANDING YOUR INSTRUMENT PANEL Conditioning (A/C) button is not pressed. This dehumidifies the air to help dry the windshield. To improve fuel economy, use these modes only when necessary. because of moisture buildup inside the vehicle. Select the outside air position for maximum defogging. • The A/C will engage automatically to prevent fogging when the recirculation button is pressed and the mode Recirculation Control control is set to panel or panel / floor. Pressing the Recirculation Control button will put the system in recirculation mode. This can • The A/C can be deselected manually without disturbbe used when outside conditions such as ing the mode control selection. smoke, odors, dust, or high humidity are present. Activating recirculation will cause the LED in the • When the ignition switch is turned to the LOCK position, the recirculation feature will be cancelled. control button to illuminate. After ten minutes, the system will return to normal mode function and the LED Air Conditioning Control will turn off. Press this button to engage the Air Conditioning. A light will illuminate NOTE: • Continuous use of the Recirculation mode may make when the Air Conditioning system is the inside air stuffy and window fogging may occur. engaged. Rotating the dial left into the Extended use of this mode is not recommended. blue area of the scale indicates cooler • The use of the Recirculation mode in cold or damp weather will cause windows to fog on the inside,