2003 Lincoln Aviator Owner Guide 1st Printing (Spanish) - Page 530

Locks and Security Programming remote transmitters It is necessary to have all (maximum of four - original and/or new) of your remote transmitters available prior to beginning this procedure. To program the transmitters yourself: 1. Ensure the vehicle is 3 electronically unlocked. 2. Put the key in the ignition. 2 3. Turn the key from the 1 (LOCK) 4 position to 3 (ON). 4. Cycle, eight times, rapidly (within 10 seconds) between the 1 (LOCK) 1 position and 3 (ON). Note: The eighth turn must end in the 3 (ON) position. 5. The doors will lock, then unlock, to confirm that the programming mode has been activated. 6. Within 20 seconds press any button on the remote entry transmitter. Note: If more than 20 seconds have passed you will need to start the procedure over again. 7. The doors will lock, then unlock, to confirm that this remote entry transmitter has been programmed. 8. Repeat the previous steps to program each additional remote entry transmitter. 9. Turn the ignition to the 1 (LOCK) position after you have finished programming all of the remote entry transmitters. 10. The doors will lock, then unlock, to confirm that the programming has been completed. Power door lock disable feature This feature will help protect your vehicle from unauthorized entry. The UNLOCK function on the power door control will not operate with the ignition OFF and twenty seconds after the doors are closed and electronically locked by the remote entry transmitter, key pad, or power door control (if pressed while the door was open). The UNLOCK function will operate again after you unlock the vehicle using the remote entry transmitter or key pad, turn the ignition to ON, or open the door from inside of the vehicle. 162