1996 Pontiac Trans Sport Owner's Manual - Page 177

5. PressBAND and 000 will appear on the display again.Nowyou are ready to enter the last three digits of your code. 6. Press the SEEK right or left arrow to make the fourth digit of your code appear. 7. Turn the TUNE knob to make the last two digits of your code appear. 5. Press the SEEK right or left arrow to make the first digit of your code appear. 6. Turn the TUNE knob to make the second and third digits of your code appear. 7. Press BAND and 000 will appear on the display again. Now you are ready to enter the last three digits of your code. 8. Enter the last three digits of your code. The display will show the numbers as entered. 8. Press BAND. If the time appears, the unlocking sequence was successful. If the display shows SEC, the digits did not match and the unit is still secured. 9. Press BAND after you have confirmed that the code matches the secret code you have written down. The display will show SEC, indicating the radio is now operable and secure. If you lose or forget your code, contact your dealer. Disabling the Theft-Deterrent Feature 1. Turn the ignition on. 2. Turn the radio off. 9. Press BAND after you have confirmed that the code matches the secret codeyou have written down. The display will show ---,indicating that the radio is no longer secured. If the code entered is incorrect, SEC will appear on the display. The radio will remain secured until the correct code is entered. When battery power is disconnected from a secured radio, the radio won't turn on and LOC will appear on the display. TOunlock a secured radio, see "Unlockingthe Theft-Deterrent FeatureAfter a Power Loss" earlier in this section. 3. Press the 1 and 4 buttons together. Hold them down until SEC shows on the display. 4. Press SET and 000 will appear on the display. 3-19