1996 Pontiac Trans Sport Owner's Manual - Page 89

Resetting the Power Sliding Door The power sliding doormay operate incorrectly or not all because of the following conditions: 0 is 1. Check to be sure the power sliding door unlocked and securely closed. the 2. Turn the ignition switch to OFF position. to OFF. 3. Turn the power sliding door ON/OFF switch A low voltage or dead battery Disconnecting the battery If the GAUGES, TAIL or TURN B/U fuse is removed or blown. 0 4. Remove theTAIL fuse from the fuse panel. Leave it out for30 seconds. 5. Reinstall the fuseand wait 10 seconds. ON 6. Move the ON/OFF switch to the position. 7. Push eitherof the PWR DOOR buttonsto open the See "FusePanel" in the Index for more information about your fuse panel. If any of these conditions occur, the power sliding door power sliding door. will need to be reset. To do this, follow, the directions door 8. Wait five seconds and close the by pushing listed here. Itwill be easier if you read through them either PWR DOOR button. once before beginning this procedure. 7 9. Wait five seconds and repeat Steps and 8. If the door does not rest in the fully open position after repeating Step repeat Steps7 and 8 again. 7, If the door still does operate correctly, see not your dealer for service. 2-17