2006 Subaru Impreza Owner's Manual - Page 103
2006 Subaru Impreza Manual
Page 103 highlights
2-16 Keys and doors transmitter (i.e. the transmitter is lost, broken or the transmitter battery is too weak), you can disarm the system without using the transmitter. 1. Unlock the door with the key and then open the door. 2. Insert the key into the ignition switch and cycle it from the LOCK to the ON position three times within 5 seconds. When you choose the valet mode, the alarm system does not operate. In valet mode, the remote transmitter is used only for locking and unlocking the doors and rear gate (Wagon) and panic activation. To enter the valet mode, change the setting of your vehicles alarm system for deactivation mode. (Refer to Activating and deactivating the alarm system in this section.) The security indicator light will continue to flash once every three seconds indicating that the system is in the valet mode (only vehicle with an immobilizer). immobilizer, the security indicator light does not flash during the valet mode. When passive arming mode has been programmed by the dealer, arming of the system is automatically accomplished without using the remote transmitter. Note that in this mode, DOORS MUST BE MANUALLY LOCKED. Passive arming 2 1 Valet mode To enter the passive mode If you wish to program the passive arming mode, have it done by your SUBARU dealer. Arming the system To exit valet mode, change the setting of your vehicles alarm system for activation mode. (Refer to Activating and deactivating the alarm system in this section.) NOTE If your vehicle is not equipped with an 1. Turn the ignition switch to the ON position. In passive mode, the system will automatically activate the alarm but WILL NOT automatically lock the doors. In order to lock the doors you must either lock them as indicated in step 4 below or with the key once they have been closed. Failure to lock the doors manually will result in a higher security risk. 2. Turn the ignition switch from ON to LOCK position and remove the key from the ignition switch. 3. Open the doors and get out of the vehicle. 1) ON 2) LOCK 200816