2006 Subaru Impreza Owner's Manual - Page 119

3-6 Instruments and controls Hazard warning flasher Meters and gauges (WRXSTI) The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions. The hazard warning flasher works with the ignition switch in any position. To turn on the hazard warning flasher, push the hazard warning button on the instrument panel. To turn off the flasher, push the button again. 300117 When the ignition switch is turned to the “ON” position, the various parts of the combination meter are illuminated in the following sequence: 1. Meter needles and gauge needles light up. 2. Meter needles and gauge needles each show MAX position. 3. Meter needles and gauge needles each show MIN position, and REV indicator flashes. 4. Dials and indicators in meters and gauges light up. 5. “STI” mark lights up. 6. Regular illumination (for driving) begins. Combination meter illumination wise. The buzzer will sound briefly, and the outside temperature indicator will show “ON” or “– –”. ON : sequential illumination – – : sequential illumination cancelled The setting toggles between “ON” and “– –” each time the trip knob is pressed. Return the REV setting knob to its original position to complete the setting process. The buzzer will sound briefly. A few seconds later, the outside temperature indicator will return to showing the outside temperature. NOTE NOTE When the hazard warning flasher is on, the turn signals do not work. With the ignition switch in the “ON” position, it is possible to cancel sequential illumination of the combination meter. Press the trip knob while turning the REV setting knob clockwise or counterclock- Cancelling sequential illumination of the combination meter It is not possible to cancel sequential illumination of the combination meter while sequential illumination is actually taking place. Cancel sequential illumination when regular illumination (for driving) has begun. The speedometer shows the vehicle speed. Speedometer