2006 Subaru Impreza Owner's Manual - Page 224

Cruise control Cruise control enables you to maintain a constant vehicle speed without holding your foot on the accelerator pedal and it is operative when the vehicle speed is 25 mph (40 km/h) or more. Make sure the main switch is turned “OFF” when the cruise control is not in use to avoid unintentionally setting the cruise control. To set cruise control Starting and operating 7-27 vehicle reaches the desired speed. 0 NOTE If you move the cruise control lever or press the main switch button while turning the ignition switch “ON”, the cruise control function is deactivated and the “CRUISE” indicator light flashes. To reactivate the cruise control function, turn the ignition switch back to the “ACC” or “LOCK” position, and then turn it again to the “ON” position. Do not use the cruise control under any of the following conditions. This may cause loss of vehicle control: driving up or down a steep grade driving on slippery or winding roads driving in heavy traffic 1. Push the main switch button. 300332 3. Push the control lever downward in the “SET/COAST” direction and release it. Then release the accelerator pedal. 300333 The “ ” indicator light on the combination meter will come on. 2. Depress the accelerator pedal until the 700361 At this time, the “ ” indicator light is illuminated in the combination meter. – CONTINUED – 700362