2011 Subaru Outback Owner's Manual - Page 110

2-22 Keys and doors held. For some models, this switch also has a one-touch auto up function that allows the window to be closed fully without holding the switch. Pull the switch up until it clicks and release it, and the window will fully close. To stop the window halfway, press the switch down lightly. NOTE . If a window detects an impact similar to that caused by trapping an object depending on the driving conditions, the anti-entrapment function may operate. . The window cannot be operated for a few seconds after the anti-entrapment function operates. . If the vehicle's battery is disconnected due to situations such as battery or fuse replacement, the antientrapment function is deactivated. Initialize the power window to reactivate the anti-entrapment function. Refer to "Initialization of power window" F2-24. While closing automatically, if the window senses a substantial enough object trapped between the window and the window frame, it automatically moves down slightly and stops. ! Operating the passengers' windows NOTE If the vehicle's battery is disconnected due to situations such as battery or fuse replacement, the one-touch auto up/down function is deactivated. Initialize the power window to reactivate the one-touch auto up/down function. Refer to "Initialization of power window" F2-24. ! Anti-entrapment function CAUTION . Never attempt to test this function using fingers, hands or other parts of your body. . The anti-entrapment function may not operate properly if some object gets trapped just before the window fully closes. To open: Press the appropriate switch down and hold it until the window reaches the desired position. To close: Pull the switch up and hold it until the window reaches the desired position.