2011 Subaru Outback Owner's Manual - Page 388

11-52 Maintenance and service ! High beam light bulbs 1. Remove the air intake duct (right-hand side). For the method to remove the air intake duct, refer to "Removing air intake duct" F11-7. surface. 6. Reconnect the electrical connector. 7. To install the bulb to the headlight assembly, turn it clockwise until it clicks. 8. Install the air intake duct with clips (right-hand side). 9. Set the washer tank to the original place and secure it by clip (left-hand side). 3. Disconnect the electrical connector from the bulb. Left-hand side 2. Use a screwdriver to remove the secured clip of the washer tank. To make it easy to access the bulb, move the washer tank to the horizontal direction (left-hand side). 4. Remove the bulb from the headlight assembly by turning it counterclockwise. 5. Replace the bulb with new one. At this time, use care not to touch the bulb