2011 Subaru Outback Owner's Manual - Page 95

Keys and doors lights do not turn off automatically. To turn off the lights, it is necessary that each door is completely closed. 2-7 Power door locking switches doors from the outside using the power door locking switches. The operational/non-operational setting of this function can be changed by a SUBARU dealer. Contact the nearest SUBARU dealer if you would like to change the setting. & Key lock-in prevention function This function prevents the doors from being locked with the key still in the ignition switch. ! Behavior with key lock-in prevention function operational With the driver's door open, the doors are automatically kept unlocked even if the front side of the power door locking switch is pressed. ! Behavior with key lock-in prevention function non-operational . If the lock lever is turned to the rear ("LOCK") position with the driver's door open and the driver's door is then closed with the lock lever in that position, the driver's door is locked. . If the spare key is used to lock the driver's door from the outside of the vehicle, the door is locked. This function's operational/non-operational setting can be changed by a SUBARU dealer. Contact a SUBARU dealer for details. NOTE . The factory setting (default setting) for this function is set as "operational". . When leaving the vehicle, please make sure that all doors and the rear gate (Outback) are completely closed. . The battery drainage prevention function does not operate while the key is in the ignition switch. 1) 2) Lock Unlock All doors and the rear gate (Outback) can be locked and unlocked by the power door locking switches located at the driver's side and the front passenger's side doors. To lock the doors, press the front side of the switch. To unlock the doors, press the rear side of the switch. When you close the doors after you set the door locks, the doors remain locked. NOTE Make sure that you do not leave the key inside the vehicle before locking the - CONTINUED -