2011 Subaru Outback Owner's Manual - Page 41

Seat, seatbelt and SRS airbags 1-19 2. Pull out the seatbelt slowly from the retractor. WARNING Be sure to fasten both tongue plates to the respective buckles. If the seatbelt is used only as a shoulder belt (with the connector's tongue plate not fastened to the connector's buckle on the right-hand side), it cannot properly restrain the wearer in position in an accident, possibly resulting in serious injury or death. Rear center seatbelt is stowed in the recess of the ceiling. 1. Retrieve the connector (tongue) plate from the slot in the recess by pulling the connector (tongue) plate. 3. After confirming that the webbing is not twisted, insert the connector (tongue) attached at the webbing end into the buckle on the right-hand side until a click is heard. If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again. - CONTINUED -