AIWA CX-NV20U Operating Instructions - Page 46
Sleep Timer Setting
View all AIWA CX-NV20U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SLEEP TIMER SETTING When the sleep timer is used, the power is automatically turned off after the specified time has elapsed. You can also carty out the following steps while the power is off. 1 While pressing the SHIFT button, press the SLEEP button on the remote control. "SLEEP @ and "60@ are displayed. "SLEEP@ goes out in 4 seconds, and the sleep timer starts to work. If you wish to change this time, go to step 2 before "SLEEP" @ goes out. 2 Press the 4 DOWN or _ UP button to specify the time until the power is turned off. 1 SHIFT SLEEP Q 1X* Q @@ Each time it is pressed, the time changes between 240 and 10 minutes in 1O-minute steps. Specified time 0 is displayed. To change the time d!) Carry out steps 1 and 2. 2 MDOWN Q9 ( To check the remaining time until the power is turned off While pressing the SHIFT button, press the SLEEP button once. The remaining time is displayed for 4 seconds. To cancel the sleep timer mode While pressing the SHIFT button, press the SLEEP button twice so that "SLEEP in the display goes out. 48